You Searched For: Mechanical+Seals

Regardless of where the mess is located, mops and squeegees efficiently reestablish spotless and safe work spaces. Choose between foam and the traditional microfiber yarn strand designs for high liquid absorption to maintain critical aseptic environments. Ergonomic pole handles on dry and wet mops allow easy manipulation for even the hard to reach areas. Designed for heavy routine use, mop heads can easily be cleaned in between uses or replaced for convenience.

Regardless of where the mess is located, mops and squeegees efficiently reestablish spotless and safe work spaces. Choose between foam and the traditional microfiber yarn strand designs for high liquid absorption to maintain critical aseptic environments. Ergonomic pole handles on dry and wet mops allow easy manipulation for even the hard to reach areas. Designed for heavy routine use, mop heads can easily be cleaned in between uses or replaced for convenience.


165  results were found

Sort Results

List View Easy View
SearchResultCount:"165"
Description: These lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.
Catalog Number: 141-0987
UOM: 1 * 4 items
Supplier: CONTEC

Description: Squeegee mops and handles for hygienically sensitive areas.
Catalog Number: PPSA3400715
UOM: 1 * 1 items
Supplier: PFENNIG REINIGUNGSTECHNIK


Description: Polypropylene bucket system is a stainless steel rolling cart with two polypropylene 20 L buckets, stainless steel drip cap, and angled stainless steel wringer.
Catalog Number: CONT2769-KIT
UOM: 1 * 1 KIT
Supplier: CONTEC


Description: Stainless steel telescopic handles are autoclavable.
Catalog Number: PPSA2016115
UOM: 1 * 1 items
Supplier: PFENNIG REINIGUNGSTECHNIK


Description: Mops presaturated with USP Grade IPA provide consistency between operators and eliminate the need to take extra cleaning solution and separate mops and buckets into a room. Presaturated mops allow for targeted application of IPA to surfaces. They eliminate the risk of flammable liquid spills and reduce IPA usage and VOCs. Presaturated mops also provide an ergonomic option to remove residues.
Catalog Number: CONTPSTA0022-BPR
UOM: 1 * 30 items
Supplier: CONTEC


Description: Mops for all hygienically sensitive areas, buildings without dryer.
Catalog Number: PPSA2160000
UOM: 1 * 1 items
Supplier: PFENNIG REINIGUNGSTECHNIK


Description: <p><span style="color:black">This stainless steel squeegee is lightweight, easy to use, and compatible with QuickConnect™ handles. It features a replaceable rubber blade, a secure press-down clip, and a screw-free channel for fast blade changes. The ergonomic, non-slip grip provides comfort and control for efficient cleanroom cleaning.</span></p>
Catalog Number: CONTWCSQ0018
UOM: 1 * 1 items
Supplier: CONTEC

New Product


Description: Single-use microfiber mop pads.
Catalog Number: CONTMGMP0009
UOM: 1 * 6 items
Supplier: CONTEC


Description: 3M™ Easy Trap Duster system traps and holds six times more dust, dirt, sand, and hair than traditional mops and other disposable dusting systems.
Catalog Number: MMMAET7447
UOM: 1 * 8 Roll
Supplier: 3M


Description: BetaMop™ II features a tubular-knit polyester mop head for economical floor cleaning. Quick change clamp assembly.
Catalog Number: 129-0220
UOM: 1 * 1 items
Supplier: Texwipe


Description: ClipperMop™ cleanroom mops are designed to use standard 230×230 mm (9×9'') and 310×310 mm (12×12'') cleanroom wipes, eliminating the need to qualify and inventory additional wipes or mop covers. The mophead uses non abrasive polyethylene clips to securely fasten one or more wipes to the head. The ClipperMop™ wipe attachment method does not release particles, fibres or dirt. The mop system can be sterilised by gamma irradiation, chemicals, vapourised hydrogen peroxide (VHP) or ethylene oxide (EtO). The powder-coated steel, telescopic handle extends from 73 to 134 cm.
Catalog Number: 141-0102
UOM: 1 * 1 items
Supplier: Texwipe

Description: Mop head is constructed of polyester-covered foam mop heads are available both nonsterile and sterile for critical cleaning. Absorbent foam mop head is for pharmaceutical production and buffer areas. Wide-pore foam mop head and dense urethane foam mop head are for cleanroom support and maintenance areas.
Catalog Number: 129-0523
UOM: 1 * 1 items
Supplier: MICRONOVA


Description: A series of elasticised slipcovers, with urethane foam interiors, that are ideal for fine cleaning and sanitising all surfaces and equipment in the cleanroom. Available without a foam interior or gamma irradiated for aseptic environments.
Catalog Number: 129-0549
UOM: 1 * 1 items
Supplier: MICRONOVA

Environmentally Preferable


Description: Knitted polyester mop for applying disinfectant in pharmaceutical, aseptic processing and medical device applications. Absorbent enough to clean to a dry finish but will leave enough moisture for disinfectants that require an extended drying time. Mop heads can be used directly with the fibreglass/polypropylene handle or attached to the universal handle via the quick disconnect adapter.
Catalog Number: MICRMZLM5-12IR
UOM: 1 * 24 items
Supplier: MICRONOVA


Description: This low-touch flat mop uses a simple snap-on, step-release clip action for improved cleanliness and ergonomics. Simply align the components and push into place. The ergonomic unit weighs less than 2 pounds (0,8 kilos) – handle, adapter, and NovaSnap™ mop.
Catalog Number: MICRMZNS6-14IR
UOM: 1 * 24 items
Supplier: MICRONOVA


Description: These brick-style, flat sponge mop heads are excellent for applying disinfectant in pharmaceutical production or aseptic processing applications.
Catalog Number: MICRMZFM7-14
UOM: 1 * 1 items
Supplier: MICRONOVA


33 - 48 of 165