You Searched For: HAMILTON BONADUZ

Supplier: HAMILTON BONADUZ

Description: The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

Supplier: HAMILTON BONADUZ

Description: Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Supplier: HAMILTON BONADUZ

Description: NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

Description: Syringe dilutor, Microlab®

Supplier: HAMILTON BONADUZ

Description: The EasyFerm Plus electrodes are designed to withstand demanding applications in pharmaceutical and chemical industries. They are supplied with a pre-pressurised electrolyte which prevents the diffusion of sample into the sensor.

Supplier: HAMILTON BONADUZ

Description: These headspace syringes feature a unique Glue-Free (GF) needle attachment in combination with a High Dynamic (HD) plunger. They are designed specifically for PAL COMBI–xt® headspace autosamplers. Conventional headspace syringe needles are attached to the syringe glass body using glue (cement). Common problems are detached needles or ghost peaks due to low chemical inertness of the cement to solvents or limited resistance to higher temperature. These problems are addressed with the Glue Free High Temperature (HDHT) headspace syringes.

Supplier: HAMILTON BONADUZ

Description: For full information concerning health and safety data please contact Avantor or Hamilton directly.

SDS Certificates

Catalog Number: (662-9214)

Supplier: HAMILTON BONADUZ

Description: The Single Pore concept stands for precise, reliable, and fast readings with a proven, patented system that ensure optimal contact between the electrolyte and the sample.

UOM: 1 * 1 items

Sale

Supplier: HAMILTON BONADUZ

Description: These electrodes are especially well suited for Knick® Portamess® equipment. The electrode head creates a hermetic seal with the Portamess® storage tube.

Supplier: HAMILTON BONADUZ

Description: The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Catalog Number: (662-9223)

Supplier: HAMILTON BONADUZ

Description: Hamilton storage solution is recommended to increase sensor longevity when not in use. The liquid solution is acid buffered to help with sensor response time after storage as well as prevent any biological growth.

UOM: 1 * 500 mL

SDS Sale

Supplier: HAMILTON BONADUZ

Description: These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Catalog Number: (HAMI238322)

Supplier: HAMILTON BONADUZ

Description: 475±5 mV ORP buffer

UOM: 1 * 250 mL

Certificates Sale

Supplier: HAMILTON BONADUZ

Description: These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

Description: Conductivity standards with stability of ±1% - guaranteed over a lifetime of up to three years.

Certificates New Product

Supplier: HAMILTON BONADUZ

Description: The Bubble Free Prime (BFP) syringe is specifically designed for the Microlab® 600 series and the only syringe type compatible with the instrument. It has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.