Print…

You Searched For: Mechanical+Seals


9,635  results were found

Refine Results Sort by
SearchResultCount:"9635"

Sort Results

List View Easy View

Rate These Search Results

Product Image-REST21239

Dual Vespel® ring inlet seals

Supplier: Restek
Description: A ring inlet seal greatly improves injection port performance as it stays sealed even after repeated temperature cycles, without retightening the reducing nut. This seal features two soft Vespel® rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal.

Product Image-SCTV319002

Funnel with ball and lid, electrostatic conductive, ARNOLD, V2.0

Supplier: S.C.A.T.
Description: The strong and electrically conductive safety funnel 'ARNOLD' V2.0 with lid and ball meets the highest requirements for safe disposal of hazardous liquid waste due to its combination of two independent safety mechanisms. The two safety features consist of a ball integrated in the funnel basin and a sealing ring incorporated in the hinged lid of the funnel, which prevent the escape of toxic gases. The funnel is especially designed for explosive or flammable substances, as the PE-HD material used is eclectically conductive and charges can be dissipated via the ground cable.

Image Unavailable-ILMV701143

External centering rings, type KF

Supplier: Welch by Gardner Denver
Description: External centering rings for double sided mechanism made of aluminium, with perbunan O-ring.

Image Unavailable-HWSA3792645P/P

Stirrer guides with mechanical seal

Catalog Number: (HWSA3792645P/P)
Supplier: HWS LABORTECHNIK
Description: The HWS stirrer guide with ceramic mechanical seal and encapsuled ball bearing in stainless steel to ensure safe working under difficult application. HWS ceramic mechanical seal is applicable for various stirrer materials like glass, stainlesssteel, hastelloy, and more its particular advantage is in combination with coated stirrers (PFA,PTFE, and more) because the static seal prevents damage to the shaft during operation.
UOM: 1 * 1 items
Product Image-CONTSF-7

Cleaning swabs, sealed foam, CONSTIX® SF-7

Catalog Number: (CONTSF-7)
Supplier: CONTEC
Description: The SF-7 swab consists of 100 PPI polyurethane foam adhesive-bonded to a flexible nylon tip. The tip is mechanically secured in a tubular PP handle.
UOM: 1 * 500 items
Product Image-LBCP5240800

Accessories for glove boxes, HEPA filtered, Precise™ and weigh boxes, XPert™

Supplier: LABCONCO
Description: Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Product Image-FRIT50.8100.00

Accessories for planetary mills, PULVERISETTE classic line

Supplier: FRITSCH
Description: Gassing lids with 2 valves and seal for grinding bowl 80 ml volume classic line, for grinding under inert gas and for mechanical alloying, tempered steel, Tempered steel, For: PULVERISETTE 6 classic, PULVERISETTE 5/4 classic, PULVERISETTE 5/2 classic, PULVERISETTE 4 classic

Product Image-CONTSF-6

Cleaning swabs, sealed foam, CONSTIX® SF-6

Catalog Number: (CONTSF-6)
Supplier: CONTEC
Description: The SF-6 sealed foam swab consists of a 100 PPI polyurethane foam adhesive bonded to a flexible nylon tip. The tip is mechanically secured within a tubular PP handle.
UOM: 1 * 500 items
Product Image-WHEA885252

Reusable coliwasa samplers, Wheaton®

Supplier: DWK Life Sciences
Description: Uniquely designed top spin bar and bottom valve plate mechanism provides a positive seal for sample retention along with greater control for releasing the sample.

Product Image-VACU20664006

High vacuum bellow valves, VE series

Supplier: VACUUBRAND
Description: High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Product Image-REST22815

Septa, Merlin Microseal™

Supplier: Restek
Description: Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection port liner. The septum uses a 23-gauge (0,63 mm, 0,025”) needle or probe with a blunt, truncated conical tip. Since the syringe plunger end details are determined by manual or autosampler compatibility. The advantages of the septum include elimination of septum coring, longer life, consistent and low needle insertion force.

Product Image-HEWLG8010-60263

Torches for 5100 SVDV/VDV/RV

Supplier: Agilent
Description: The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Product Image-185-1112

Clamping rings for small flange connections

Supplier: VACUUBRAND
Description: For securing and mechanical pressing of O-ring seals. Aluminium or stainless steel, non rusting.

Product Image-554-2150

Stators, Rheodyne®

Supplier: IDEX RHEODYNE
Description: Stators are available in 316 stainless steel, PEEK and proprietary materials. Rheodyne® stator materials have been researched and selected for their physical and mechanical strengths. Stators only need replacing if the ports or sealing surfaces become damaged.

Product Image-819-0103

High temperature anti-static cleanroom tapes

Supplier: ULTRATAPE
Description: High temperature polyimide ESD tapes with silicone adhesive. These cleanroom tapes are designed for use in ESD-sensitive environments such as sealing anti-static bags, packing of electronic components, medical instruments, precision mechanical equipment, and splicing films. They can withstand temperatures up to 315 °C for use during circuit board manufacturing.

Product Image-613-7116

VWR® Standard Line, Multi-Channel Pipettes, Mechanical, Variable Volume

Supplier: VWR Collection
Description: These lightweight Standard Line pipettes feature a revolutionary suspension system which allows the shaft to retract slightly when pressed against a row of pipette tips. Each shaft moves independently, resulting in an even sealing force being applied to all 8 or 12 tips. The suspension system not only ensures secure tip sealing, but also eliminates tips being jammed.

5 year warranty

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
33 - 48 of 9,635
no targeter for Bottom