You Searched For: Chromatography+Spare+Parts


52,810  results were found

SearchResultCount:"52810"

Sort Results

List View Easy View

Rate These Search Results

Catalog Number: (HEWL8002-0903)
Supplier: Agilent
Description: These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.
UOM: 1 * 1 items


Supplier: Restek
Description: Flow splitters with fluid resistor technology eliminate the adjustments to the capillary tubing for optimising split ratio with wide range of interchangeable resistors.

Supplier: Agilent
Description: CrossLab piston seal, reversed-phase, For: Thermo UltiMate 3000 RS and SD pump series

Supplier: Restek
Description: These FID capillary column adapters made of stainless steel are ideal for PerkinElmer Auto SYS XL.

Supplier: Restek
Description: Packed column inlet adapter kits center columns perfectly in 6,35 mm injection ports to eliminate bent syringe needles.

Supplier: Agilent
Description: Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Catalog Number: (HEWLG4911-01201)
Supplier: Agilent
Description: A range of high quality supplies and components for the Integrated Sample Introduction System (ISIS) for use with the 7700 ICP-MS range.
UOM: 1 * 1 items


Supplier: Agilent
Description: In 2005, Agilent released an improved FPD with minimum detectable levels (MDL) of 3,6 pg/s for sulphur and 60 fg/s for phosphorus. This is more than a five times improvement for sulphur.

Supplier: Restek
Description: This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Agilent
Description: These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent
Description: These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent
Description: The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Restek
Description: This Siltek® treated septum packed purge port weldment for Agilent 5890 GC makes weldment inert and eliminates adsorption of sensitive compounds such as, DDT and Endrin.

Supplier: Restek
Description: These preventive maintenance (PM) kits are suitable for Waters HPLC and ACQUITY UPLC Systems.

Supplier: Agilent
Description: A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent
Description: These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
209 - 224 of 52,810
no targeter for Bottom