You Searched For: Microscopy and staining reagents

VWR offers a broad line of reagent droppers, diagnostic kits, and antigens and antisera, for aid in identifying a variety of microscopic organisms. The visualization of bacteria by means of staining procedures is an important tool for any microbiologist to have at their disposal, and these carefully standardized and reproducible stain reagents help to ensure accurate and easily interpretable results. Stains are also available to provide early detection of positive blood cultures by fluorescence procedures.

VWR offers a broad line of reagent droppers, diagnostic kits, and antigens and antisera, for aid in identifying a variety of microscopic organisms. The visualization of bacteria by means of staining procedures is an important tool for any microbiologist to have at their disposal, and these carefully standardized and reproducible stain reagents help to ensure accurate and easily interpretable results. Stains are also available to provide early detection of positive blood cultures by fluorescence procedures.


107  results were found

SearchResultCount:"107"

Sort Results

List View Easy View

Rate These Search Results

Catalog Number: (1.00579.0500)
Supplier: Merck
Description: DPX new is a synthetic non aqueous mounting medium for microscopy. In its formulation, the teratogenic plasticiizer dibutyl phthalate (DBP) has been avoided, which renders the composition safer for the environment and more user friendly than the conventionally used mounting agents such as DPX.
UOM: 1 * 500 mL

SDS


Supplier: SIGMA ALDRICH MICROSCOPY
Description: DPX Mountant for histology has been used as a slide mountant to fix sections.

SDS

New Transparency for European Customers

Have you noticed our new improved visibility on stock location at checkout?

Find out more

Enhancement to stock locations

Catalog Number: (317616-100ML)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: D.P.X mounting medium is a mixture of distyrene (polystyrene), a plasticizer (tricresyl phosphate), and xylene. It facilitates the protection of stains and can dry quickly.
UOM: 1 * 100 mL


Catalog Number: (F4680-25ML)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Fluoromount™ Aqueous Mounting Medium for use with fluorescent dye-stained tissue.
UOM: 1 * 25 mL

Catalog Number: (F6057-20ML)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Fluoroshield™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.
UOM: 1 * 20 mL


Supplier: SIGMA ALDRICH MICROSCOPY
Description: This is a mounting medium (contains 45% acrylic resin and 55% xylenes) used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials.
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Bouin's solution is an excellent fixative for preserving soft and delicate structures. It is prepared with saturated picric acid, formaldehyde and acetic acid.

Catalog Number: (A3429-4L)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Differentiation solution comprises acidified ethanol or isopropanol that is used to decolourise hematoxylin stain. The duration of exposure to the solution determines the degree of decolourisation. Differentiation is a crucial step in hematoxylin-eosin staining to achieve the proper colour contrast necessary for visualisation, by selectively removing excess hematoxylin from the tissue section and leaving behind the desired staining intensity.
UOM: 1 * 4 L


Supplier: Merck
Description: Used to increase lens effectiveness

SDS

Supplier: Merck
Description: The defined hardness and uniformity of the material to be cut are vital requirements in creating consistent quality in cutting. These requirements can be met using a range of suitable substances, such as paraffins, resins, gelatine and celloidin.

SDS

Supplier: SIGMA ALDRICH MICROSCOPY
Description: Immersion oil is used for high resolution (1000X) light microscopy work under oil immersion objective lens.
Catalog Number: (F6937-20ML)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Fluoroshield™ with 1,4-Diazabicyclo[2.2.2]octane is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.
UOM: 1 * 20 mL

Supplier: Merck
Description: Water-free mounting media, such as Neo-Mount®, should be used for permanent mounting and long-term storage of samples. Slides processed in pathologyl laboratories need to be stored up to 10 years, whereby the staining results need to be stable and fading-out is not acceptable. Neo-Mount®, anhydrous mounting medium for microscopy is an extremely colour-stable mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount® needs to be combined with Neo-Clear® exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior to mounting, any excess Neo-Clear® should be circumvented, as air bubbles might arise under the cover slip. The same pre-condition should also be met when mounting specimens using cover slip machines; in this area, Neo-Clear® can be most efficiently eliminated by incubating the slides for 1 minute in an empty slide rack.

SDS

Supplier: Merck
Description: Entellan® new is a new mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 250 and 600 mPas, 1,00869 has a small viscosity range. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new.

SDS

Catalog Number: (1.08562.0050)
Supplier: Merck
Description: Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.
UOM: 1 * 50 mL

SDS


Catalog Number: (45359-1EA-F)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).
UOM: 1 * 1 Each


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
17 - 32 of 107
no targeter for Bottom