Print…

You Searched For: Deionisers

Deionizers remove mineral ions, such as sodium, calcium, iron, copper, chloride, and sulfate, from water, making it highly pure and useful for most laboratory and general manufacturing applications. These units are economical, stand-alone systems that can be customized to meet specific application needs, providing low to medium volumes of deionized water. Built-in meters in most models allow for easy and convenient monitoring of water quality and timed dispensation.

Deionizers remove mineral ions, such as sodium, calcium, iron, copper, chloride, and sulfate, from water, making it highly pure and useful for most laboratory and general manufacturing applications. These units are economical, stand-alone systems that can be customized to meet specific application needs, providing low to medium volumes of deionized water. Built-in meters in most models allow for easy and convenient monitoring of water quality and timed dispensation.


17  results were found

Refine Results Sort by
SearchResultCount:"17"

Sort Results

List View Easy View

Rate These Search Results

Product Image-BIND8012-0759

Water treatment system, Pure Aqua Service

Catalog Number: (BIND8012-0759)
Supplier: Binder
Description: This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.
UOM: 1 * 1 items
Product Image-MIEL10087320

Water treatment units, Aqua purificator PG 8595

Catalog Number: (MIEL10087320)
Supplier: MIELE
Description: Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.
UOM: 1 * 1 items

New Transparency for European Customers

Have you noticed our new improved visibility on stock location at checkout?

Find out more

Enhancement to stock locations

Product Image-141-0552

Water softener, Aqua-Soft-System, PG 8597

Catalog Number: (141-0552)
Supplier: MIELE
Description: The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.
UOM: 1 * 1 items
Product Image-SMEGWP3010

Resin Column Water Purifiers

Catalog Number: (SMEGWP3010)
Supplier: SMEG S.P.A.
Description: The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.
UOM: 1 * 1 items
Product Image-171-0421

Deionisers, Micromeg MC/DS and B 114

Catalog Number: (171-0421)
Supplier: ELGA LabWater
Description: These wall-mounted deionisers are cost-effective stand-alone systems that provide 30 to 90 l of primary or deionized grade water for a wide range of laboratory and general manufacturing applications.
UOM: 1 * 1 items
Image Unavailable-PURIL991020

Deionisers, labwater

Supplier: Purite
Description: These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.

Product Image-LBCP9000732

WaterPro® PS HPLC/UF Hybrid Polishing Station

Catalog Number: (LBCP9000732)
Supplier: LABCONCO
Description: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
UOM: 1 * 1 items

New Product


Product Image-BEHRB00223482

Deionizers with stainless steel canisters, behropur®

Catalog Number: (BEHRB00223482)
Supplier: BEHR
Description: The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.
UOM: 1 * 1 items
Product Image-HECH40075010

Deioniser, mixed-bed, Aquademat

Catalog Number: (HECH40075010)
Supplier: GLASWARENFABRIK KARL HECHT
Description: Ion exchanger for purified water.
UOM: 1 * 1 items
Product Image-BEHRB00223463

Deionisers, behropur®

Supplier: BEHR
Description: These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Product Image-BARND0805

Deionizer, barnstead Bantam™

Catalog Number: (BARND0805)
Supplier: Thermo Fisher Scientific
Description: It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.
UOM: 1 * 1 items
Image Unavailable-BARND4511

Deionizer, B-Pure™

Supplier: Thermo Fisher Scientific
Description: These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Product Image-172-4112

Water deionisation cartridges, Aquadem® DL

Supplier: ENVIROFALK PHARMAWATERSYSTEMS
Description: Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Product Image-172-4153

Water deionisation cartridges, Aquadem® SDF

Supplier: ENVIROFALK PHARMAWATERSYSTEMS
Description: Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Product Image-BEHRB00223473

Deionizers with nylon resin canisters, behropur®

Supplier: BEHR
Description: Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Product Image-REST22000

Deionisers, parker hydroGen mate

Catalog Number: (REST22000)
Supplier: Restek
Description: This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.
UOM: 1 * 1 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
1 - 16 of 17
no targeter for Bottom