You Searched For: Water+Baths,+Stirred


18,062  results were found

SearchResultCount:"18062"

Sort Results

List View Easy View

Rate These Search Results

Supplier: VWR Collection
Description: Stainless steel baths with user friendly MX temperature controller with three control buttons and on-screen prompts.

Supplier: VWR Collection
Description: Transparent polycarbonate baths keep samples visible, units feature user friendly MX temperature controller with three control buttons and on-screen prompts.

Why would you use an automatic colony counter?

Our VWR® colony counters range from low-cost units for quick counts to high-end models for extended applications and IQ/OQ

WATCH THE VIDEO

Consistency-Accuracy-Speed-Efficiency

C.A.S.E.
Catalog Number: (442-0814)
Supplier: 2MAG
Description: Stainless steel mixBATH, durable, robust, is suitable for MIXdrive 6/15/60 as well as MIXdrive 1/1 eco/1 XS, fitting for immersion thermostats (heating/cooling), stirring point mark inside the bath, left-/right stop for optimised thermostat positioning (circulation pump) for use with MIXdrive 6 resp. MIXdrive 15.
UOM: 1 * 1 items


Supplier: VWR Collection
Description: These thermometers fit into flasks, cuvettes, test tubes and beakers for temperature readings in food, gases, samples, reagents, water baths, ovens, incubators and semi-solids. The long stem allows user to make measurements while stirring solutions in deep vessels. Stainless steel probe (Ø: 3,5 mm).

Supplier: NICKEL ELECTRO
Description: General purpose stirred water baths offering good temperature stability and uniformity for consistent, repeatable results. Operation below ambient is possible using an optional refrigerated dip cooler.

Supplier: IKA
Description: Cylindrical stainless steel bath with heating elements underneath bath vessel. Low viscosity oil 50 cP (mPa.s) or water can be used as the heat transfer fluid. Bath has stirring speed range of 150 to 800 min⁻¹ and the internal tank dimensions are 200×160 mm (Ø×H).

Supplier: 2MAG
Description: The hermetically sealed stainless steel housing is water, germ and dust-proof. Operating temperatures for basic version up to 50 °C, for high temperature (HT) version up to 95 °C submerged in water baths, up to 200 °C in ovens.

Supplier: NICKEL ELECTRO
Description: Stainless steel gable lids helps reduce evaporation, assists in keeping samples in a water bath free from contamination and saves energy.

Supplier: 2MAG
Description: The hermetically sealed stainless steel housing is water, germ and dust-proof. Operating temperatures for the basic version up to 50 °C, for HT version up to 95 °C submerged in water baths, up to 200 °C in ovens. M4 thread is integrated in the stainless steel bottom plate (only for MIXdrive 1 XS basic version).

Supplier: GRANT INSTRUMENTS
Description: The Grant Optima™ range consists of both general purpose and advanced performance thermostats combined with premium stainless steel baths (drain tap on 12, 18, 26 and 38 litre baths). Stirred circulation within the bath ensures excellent temperature stability and uniformity. Units can also be used with accessory C1G and C2G immersion coolers for operation below ambient temperatures.

Catalog Number: (VELPSA30400209)
Supplier: VELP SCIENTIFIC
Description: The procedure for determining dietary fibre exposes the sample to a series of enzymatic digestions that simulate the real digestive process which takes place in the human or animal digestive tract, calculating the undigested residue remaining at the end of the analysis. Generally dietary fibre analysis is carried out on foods intended for human consumption whereas raw fibre analysis is carried out on animal feeds or on raw materials of vegetable origin, eg. cereals. The GDE performs enzymatic digestion, a delicate phase where samples are immersed in a thermostatic water bath and stirred. Continuous and constant sample mixing is necessary in order to prevent the sample from overheating. The unit consists of an immersion thermostat, a transparent polycarbonate tank and a VELP 6-place magnetic stirrer to ensure excellent thermoregulation and precision. The use of deionised water is recommended as it eliminates any possible cause of limescale.
UOM: 1 * 1 items


Supplier: NICKEL ELECTRO
Description: Stainless steel flat lids.

Supplier: Heidolph Instruments GmbH & Co.KG
Description: Two litre water bath, PTFE coated, For: -

Catalog Number: (462-0021)
Supplier: NICKEL ELECTRO
Description: Immersion cooler without temperature control designed to be used in conjunction with Clifton NE4 stirred or circulating water baths, the unit runs continuously with the bath providing the temperature control. The immersion coil fits into the rear access hole behind the thermostirrer without loss of working area.
UOM: 1 * 1 items


Supplier: H + P LABORTECHNIK
Description: Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%; 50%; 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: 2MAG
Description: Separate heatMIXcontrol control unit for operating stirring dry bath and stirring hot plate

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
1 - 16 of 18,062
no targeter for Bottom